Circular Vest Free Crochet Patterns

Circular Vest Free Crochet Pattern: Step-by-Step Guide for All Skill Levels

If you’ve been scrolling through crochet inspiration boards lately, you’ve probably noticed the circular vest trend making a massive comeback. These effortlessly stylish layering pieces are showing up everywhere — draped over flowy blouses, layered over simple tees, and paired with everything from jeans to midi skirts. The best part? They’re far easier to make than they look, and today I’m sharing a completely free circular vest crochet pattern so you can make your own from scratch.

Whether you’re an intermediate crocheter looking for your next wearable project or a confident beginner ready to level up, this pattern walks you through everything from yarn selection to the final finishing touches. No confusing abbreviations left unexplained, no missing steps, no frustration — just a clear, well-organized pattern you can actually use.

Let’s get into it.


What Is a Circular Vest?

Before we dive into the pattern itself, let’s talk about what makes a circular vest different from a traditional crocheted vest. A circular vest starts from the center — usually the back neck or a central medallion — and grows outward in rounds, much like a granny square or a circular shawl. This construction eliminates the need for seaming shoulder pieces together, which makes the process wonderfully intuitive once you understand the shaping logic.

The finished piece drapes beautifully over the body because it follows a curved, organic structure rather than being constructed from flat rectangular panels. The front halves split naturally as you work, creating an open-front design that’s incredibly flattering and versatile. You can wear it symmetrically, pin it at the center, or let one side drape longer for an asymmetrical, editorial look.

Circular vests are also highly adaptable. The pattern below is written for a standard adult size, but I’ll include notes throughout on how to adjust for different sizes, yarn weights, and desired lengths.


Materials You’ll Need

Getting your materials together before you start is one of the best habits you can build as a crocheter. Here’s everything you’ll need for this project.

Yarn: Approximately 400–600 yards of DK or light worsted weight yarn (Category 3 or 4). For a lighter, airier drape, choose a natural fiber blend like cotton-linen or bamboo cotton. For warmth, a merino wool or wool blend works beautifully. The sample shown uses a soft sage green DK cotton, which gives it that relaxed, earthy feel.

Hook: US Size H/5mm (or whatever size gets you to gauge). Circular vests are very forgiving if your gauge is slightly off, since there’s no structured fitting at the bust or waist — but if you’re using your finished piece as a garment layering item, swatching will still save you headaches.

Notions: Scissors, a yarn needle for weaving in ends, stitch markers (at least 4–6), and a tape measure. A blocking mat and pins are optional but highly recommended for finishing.

Gauge: 14 stitches and 8 rows = 4 inches in half double crochet. Adjust your hook size if needed.

Finished Dimensions (before blocking): Approximately 24 inches from center back to front hem and 18 inches wide when laid flat along one shoulder. After blocking, dimensions will open up slightly depending on fiber content.


Abbreviations Used in This Pattern

ch — chain
sl st — slip stitch
sc — single crochet
hdc — half double crochet
dc — double crochet
sk — skip
sp — space
rep — repeat
st(s) — stitch(es)
RS — right side
WS — wrong side
BLO — back loop only


Understanding the Construction

This vest is worked in a top-down circular construction. You begin at the center back neck with a foundation chain, join it into a ring, and then work outward in joined rounds. The increase pattern creates the circular shape that allows the fabric to lie flat at the back while gracefully falling forward on either side.

Around Row 15–20 (depending on your size), you’ll divide the work to create the armhole openings, working each front panel separately before rejoining at a few strategic points. Don’t worry — this process is clearly marked in the pattern below, and it’s much simpler than it sounds.


The Pattern

Foundation

Chain 8, join with a slip stitch to form a ring.

Round 1 (RS): Ch 2 (counts as first hdc), work 15 hdc into the ring, join with sl st to top of beginning ch-2. (16 hdc)

Round 2: Ch 3 (counts as dc), dc in same st, 2 dc in each st around, join with sl st to top of beginning ch-3. (32 dc)

Round 3: Ch 2, hdc in same st, hdc in next st, 2 hdc in next st, hdc in next st; rep from around, join. (48 hdc)

Round 4: Ch 3, dc in same st, dc in next 2 sts, 2 dc in next st, dc in next 2 sts; rep from around, join. (64 dc)

Round 5: Ch 2, hdc in same st, hdc in next 3 sts, 2 hdc in next st, hdc in next 3 sts; rep from around, join. (80 hdc)

At this point, your work should be lying flat like a small circular medallion. If it’s starting to ruffle, your increases are too frequent — move to your next size up hook. If it’s cupping like a bowl, your increases are too infrequent — try going down a hook size or adding an extra increase round.

Round 6: Ch 1, sc in BLO of each st around, join. (80 sc) — This textural round adds a subtle ridge and helps the fabric maintain its drape.

Round 7: Ch 3, dc in same st, dc in next 4 sts, 2 dc in next st, dc in next 4 sts; rep from around, join. (96 dc)

Round 8: Ch 2, hdc in same st, hdc in next 5 sts, 2 hdc in next st, hdc in next 5 sts; rep from around, join. (112 hdc)

Round 9: Ch 3, dc in same st, dc in next 6 sts, 2 dc in next st, dc in next 6 sts; rep from around, join. (128 dc)

Round 10: Ch 2, hdc in same st, hdc in next 7 sts, 2 hdc in next st, hdc in next 7 sts; rep from around, join. (144 hdc)

Round 11: Ch 1, sc in BLO of each st around, join. (144 sc)

Round 12: Ch 3, dc in same st, dc in next 8 sts, 2 dc in next st, dc in next 8 sts; rep from around, join. (160 dc)

Round 13: Ch 2, hdc in same st, hdc in next 9 sts, 2 hdc in next st, hdc in next 9 sts; rep from around, join. (176 hdc)

Round 14: Ch 3, dc in same st, dc in next 10 sts, 2 dc in next st, dc in next 10 sts; rep from around, join. (192 dc)

Round 15: Ch 2, hdc in each st around, join. (192 hdc) — No increases. This straight round helps even out the shaping before the armhole divide.


Dividing for Armholes

This is where the vest takes shape. You’ll now section your stitches into back panel and two front panels, skipping stitches to create armhole openings.

Place markers as follows: Starting from your join point (center back), count 64 sts for the back panel, place a marker. Count 16 sts and place another marker (this is armhole 1). Count 32 sts and place a marker (right front panel). Count 16 sts and place another marker (armhole 2). The remaining 64 sts form the left front panel.

Back Panel (Rows 1–10):

Join yarn at back panel marker.

Row 1: Ch 2, hdc in same st, hdc across 63 sts to next marker, turn. (64 hdc)
Row 2: Ch 2, hdc in each st across, turn.

Repeat Row 2 until back panel measures approximately 9 inches from the armhole divide, or desired length. Fasten off and leave a long tail.

Right Front Panel (Rows 1–10):

Join yarn at the marker after armhole 1.

Row 1: Ch 2, hdc across 31 sts to next marker, turn. (32 hdc)
Row 2: Ch 2, hdc in each st across, turn.

Work even until piece matches back panel length. Fasten off.

Left Front Panel (Rows 1–10):

Join yarn after armhole 2.

Row 1: Ch 2, hdc across to end of round sts, turn. (64 hdc) — Note: The left front is intentionally wider than the right to allow for the open-front drape. You can make them equal for a symmetrical look.
Row 2: Ch 2, hdc in each st across, turn.

Work even until piece matches back panel length. Fasten off.


Edging

A clean edging makes all the difference on a garment like this. Work a single round of sc evenly around the entire perimeter of the vest — all four edges including the armholes and the center front opening. Work 3 sc into each corner to keep edges flat and prevent pulling.

For a more polished look, you can add a second round in reverse single crochet (crab stitch) immediately after, working from left to right. This adds a beautiful corded edge that frames the piece without overwhelming it.

If you prefer a lacier border, try this simple shell edging in place of the plain sc: sk 2 sts, 5 dc in next st, sk 2 sts, sl st in next st; rep from around. Adjust spacing as needed to keep the border from puckering.


Sizing Notes

The pattern as written fits a size S/M (approximately 36–40 inch bust). For a larger size, simply continue the increase rounds beyond Round 14, adding increases in the same ratio (adding one more stitch between increases per round) until the medallion reaches the circumference you need. As a general rule, add one additional round of increases for every 2 additional inches of bust circumference you need.

For a cropped vest (great for warmer weather and layering over bralettes), stop the front and back panels at 5–6 inches instead of 9. For a longer vest or almost-duster length, continue the panels to 12–14 inches.


Yarn Substitution Tips

This pattern is wonderfully yarn-agnostic. Here are a few directions you can take it depending on the look and feel you want.

Cotton or cotton-linen blends give you a crisp, breathable vest perfect for spring and summer. They block beautifully and the finished piece has a lovely weight that drapes without clinging.

Bamboo or modal yarns are incredibly soft and have a natural sheen that makes the stitch texture pop. These are great choices if you want a slightly more elevated, polished aesthetic.

Merino wool or superwash wool blends add warmth and a slight elasticity that makes the vest feel cozy and comfortable for fall and winter layering. The stitches tend to bloom slightly after washing, which fills in any gaps and adds to the fabric’s overall softness.

Avoid very bulky yarns for this particular construction — the circular increases can become unwieldy and the finished piece may not drape the way you want. If you want to use a heavier yarn, size up your hook significantly and reduce the number of increase rounds to compensate.


Blocking Your Finished Vest

Blocking is the single step that transforms a handmade crochet piece from looking homemade to looking truly professional. For this vest, wet blocking works best.

Soak the finished vest in cool water with a small amount of gentle wool wash or baby shampoo for about 20 minutes. Gently squeeze out the water — never wring — then roll it in a clean towel and press to remove excess moisture. Lay it flat on your blocking mat, gently stretching it to the desired dimensions, and pin along the edges, paying particular attention to the front opening and hem. Let it dry completely before unpinning.

If you used a cotton or linen yarn, you can also steam block by hovering a steam iron just above the surface without touching the fabric. This is especially effective for opening up the stitches and evening out any tension inconsistencies.


Styling Your Circular Vest

One of the reasons circular vests have become such a popular crochet project is how endlessly wearable the finished piece is. Here are some of my favorite ways to style this vest once it’s blocked and finished.

Layer it over a fitted turtleneck for a textural, artisanal look that feels very designer without the designer price tag. The circular hem at the back and the open front create a gorgeous silhouette when paired with straight-leg trousers.

Wear it over a simple white linen shirt with the front panels hanging open for a relaxed, boho look that works beautifully at markets, festivals, or just running weekend errands.

Pin the front panels together with a large decorative brooch or a simple yarn tie threaded through the stitches at chest height. This instantly changes the silhouette and makes the vest feel like a completely different piece.

Layer over a slip dress for an unexpectedly elegant look. Choose your yarn in a tone-on-tone shade close to the dress color for a sophisticated, tonal outfit, or go for contrast with a bold, saturated yarn color against a neutral slip.


Troubleshooting Common Issues

Even experienced crocheters run into hiccups when working circular garments for the first time. Here are the most common problems and how to fix them.

If your circle is ruffling or wavy, you have too many stitches for the number of rounds worked. Try tightening your tension slightly or frogging back to the last flat round and working one plain round (no increases) before continuing.

If your circle is cupping or forming a dome shape, you need more increases. Add an extra increase round where needed.

If the armhole openings feel too tight, add a chain bridge across the skipped stitches rather than simply skipping them. Ch 8–10 across the armhole gap and join — this adds ease and makes it much more comfortable to wear.

If your front panels are twisting or pulling, your tension is inconsistent between rows. Try consciously loosening your tension slightly at the beginning of each row, since this is where most people tighten up instinctively.


Final Thoughts

A circular vest is one of those crochet projects that genuinely never gets old. Once you understand the construction logic, you’ll find yourself coming back to this pattern again and again with different yarns, different color stories, and different finishing details. It’s the kind of wearable piece that earns compliments every time and always prompts the question, “Did you make that yourself?”

And yes — you absolutely did.

Save this pattern, pin it, share it with a crochet friend who’s been looking for a wearable project, and most of all, enjoy the process. There’s something genuinely meditative about working outward from that tiny center ring and watching a full garment grow round by round under your hook.

Happy crocheting, and I can’t wait to see what you make.

Categorized in:

Summer Crochet Outfits,

Last Update: August 27, 2026

Tagged in:

, , , ,